Carlon PVC Conduit Painting Manuel d'utilisateur télécharger pdf

TECHNICAL BULLETIN ""

Painting Nonmetallic Conduit and Fittings for Aesthetic

Purposes Only

Paint Selection --

What IS Recommended - Water based or latex coatings

Performance of water based coatings, especially latex paints, excel over others when

applied to polyvinyl chloride (PVC). They assist in the preservation of the physical

properties of the nonmetallic conduit and fittings. For optimal results, follow

recommendations on packaging or by paint supplier for application techniques.

It is advisable to test paint on a small concealed area for appearance and adhesion

before painting the entire raceway.

What IS NOT Recommended - Solvent based coatings

Solvent based coatings, which contain aromatic hydrocarbons, may diminish the

physical properties of a PVC raceway.

PVC Raceway Preparation --

Cleanliness

Any contaminants such as dust, oil, grease, silicones, or other lubricants must be

removed from the raceway. It is recommended that all surfaces be cleaned with soap

and water, or degreasers such as ethanol or methanol before paint application.

Primer

Although PVC can be painted without priming, a primer in conjunction with latex paint

often produces better results.

Static Charge:

Often times static charge creates a problem with dust attraction. If this occurs than it

is suggested that a paint supplier be contacted for an anti-static dipping agent.

Number of Coats

For optimum results, use a brush to apply the first coat. Then, spray or roll on the

second coat for complete coverage.

Painting Safety --

Paint in a well ventilated area or with an appropriate safety breathing apparatus.

Gross Automation (877) 268-3700 · www.carlonsales.com · [email protected]

Page 1

!!!!!!!!!!!! TECHNICAL BULLETIN """"""""""""Painting Nonmetallic Conduit and Fittings fo

Pas de commentaire

Carlon PVC Conduit Painting Manuel d'utilisateur